Death of a Router

_temp_img_3674a1.jpg

Well, I think my D-Link router is finally dying. I've had it for years, and I've always considered it a "golden sample" router - it always did exactly what it was supposed to do without having to reboot it, etc.

This is remarkable because it's an old DI-614(+?) wireless router. It's of the Age of Dlink where if it did what it was supposed to for a couple of hours straight, it was a friggin miracle.

Now, however, I'm getting connection dropouts and intermittent resets. And it's getting worse. I can take out my whole connection by starting a bittorrent download.

So out with the router it is. I think I'm going to give Zeroshell a try. I've got an old single board computer - A Nexcom EBC-563 based on the Via C3-733 processor.

We've used this thing as a router before, as an experiment. Three ethernet ports, 256mb SIMM, downclocked as low as it'll go - 400mhz, and booting off a compact flash card. It was pretty neat stuff at the time.

Now, I'm waiting on Zeroshell to write to a compact flash card as we speak. Maybe now I can put my hoary old D-Link to rest.

technorati tags:Router, SBC

A Time of Mourning

Well, it's Official. The Zaurus is dead.

We'd actually been expecting this for quite some time. "We" being an Engineer buddy of mine and myself. Way back in the day, we both worked at a research institute at a University that had strong ties to the Japanese electronics market. One day, a VP of R&D from Sharp came to visit, and he bestowed upon us a developer version Zaurus - the 5000d - for evaluation.

Fast forward several years, and my buddy contacts that man, looking to offer his ideas on re-imaging the Zaurus line (now at the 3100). They apparently had a very illuminating conversation, with topics like the VP admitting that they (Sharp) had no idea what the open source community was about, or why anyone would really want the source code in the first place, etc.

Ultimately it turns out that he had moved on to be the head of the Sharp wZero3 project, and he put us in touch with the current head of the Zaurus project. My friend eventually got to talk with one of the assistants for the new head, and he was told in no uncertain terms that Sharp wasn't interested in any further investment in the Zaurus project.

I had hopefully taken that to mean that no investment beyond their existing R&D program, but it wasn't to be. The 3200 came out and that is the end of a very long and glorious ride with the Zaurus.

Now, if only Vulcan would hurry up and sell me a Flipstart, I might be able to get over the loss...

Vulcan Flipstart Update!

I saw over in the Pocketpenguin forum that Vulcan's Flipstart website had been updated, and I signed up for the "first to know" thing right away. I would buy a flipstart the very instant it becomes available, as I view it as the perfect Zaurus killer:

Flipstart:
5.8"x4"x1"
454g
256mb ram (although I hope they bump this to at least 512 in their release)
30gb HD
1024x600 screen
wi-fi
USB2.0
Camera
VGA out

vs the Zaurus
4.9"x3.4"x1"
298g
64mb ram
4-6gb HD (very slow)
640x480 touchscreen
USB1.1

vs Kohjinsha
8.1"x6.5"x1.5"
980g
512mb-1gb ram
40-80gb HD
Wi-fi/BT
USB2.0
VGA out

The flipstart is half again heavier, only 0.9" wider and 0.6" deeper, same thickness. You gain x86 compatibility, built in wireless, a useful screen resolution, more memory (very, very important) and a much larger and faster HD.

The size might put it over the top for some, but I keep my Z in my coat pocket. The reduced battery life (3-4hrs) is still pretty good, and wouldn't affect my usage. The loss of the touchscreen will be harder to take, though.

It's like they compressed a Kohjinsha down into the size of a Z and left a higher res screen.I just bought a Macbook, which probably means my use of the Libretto will go down. If Vulcan comes out with this little wonder I'd probably sell off all but 1 Z and the Libretto, then carry the Flipstart. (And either an FIC open moko phone or an iPhone )